Categories
Risers are small pieces of plastic or metal that are placed between the deck of a skateboard and the trucks. Risers help to prevent the wheels from hitting the deck when making turns, and they also provide a little bit of extra height to make it easier to do tricks.
There are different sizes of risers, and you can choose the ones that best fit your skating style. You can also get risers with different designs, such as those with flames or skulls. Some people even add stickers to their risers to personalize them even more.
Table of Contents
Do skateboards need risers?
Most skateboards do not come with risers, but they can be a good idea to add them if you plan on doing a lot of tricks or turning. Risers can help to prevent the wheels from hitting the deck and make it easier to do certain tricks. You can buy risers at most skate shops, read some reviews or you can make your own if you’re feeling creative.
Whether or not you use risers is up to you, but they can be a helpful addition for many skaters. Experiment with different sizes and designs to find the ones that work best for you and your skating style.
https://www.youtube.com/watch?v=rdk2WCU3GIA
Should i put risers on my skateboard?
It depends on what you plan to use your skateboard for. If you’re just cruising around, you probably don’t need risers. However, if you’re planning on doing a lot of tricks or turns, risers can be a good idea to prevent the wheels from hitting the deck.
When to use risers skateboard?
Wheel bite is a common problem for skaters, and risers can solve the issue. Risers are usually recommended if you have larger wheels – 55mm or more–with your deck resting on them at all times to reduce wheel stress caused by compression against an edge. For smaller skateboards 1/8″ shock pad adhesive may also help protect against vibration that leads into cracks over time in certain conditions like heavy traffic area where there’s lots going on underfoot which could lead some people down the path towards believing they’re not capable anymore when really just dealing with everyday things athletes face
What size of risers for skateboard?
The size of the riser you need depends on the size of your wheels. For example, if you have 55mm wheels, you will need 1/8″ risers.
You can find out what size of risers you need by measuring your wheel size and comparing it to the chart below.
-WHEEL SIZE (MM)-
-Riser Size (in inches)-
49 – 54 mm Not necessary
55 – 57 mm 1/8″ Riser Pad
58 – 64 mm 1/8 – 1/4 Riser Pad
65 – 67 mm 1/4” – 1/2” Riser Pad
68 mm 1/2″ Riser Pad
How do I know if my skateboard needs risers?
If you’re just cruising around, you probably don’t need risers. However, if you’re planning on doing a lot of tricks or turns, risers can be a good idea to prevent the wheels from hitting the deck.
You can also check for wheel bite by holding your skateboard upside down and spinning the wheels. If the wheels hit the deck, you may need risers.
Wheel bite is an issue with larger wheels, like those on longboards or cruisers. If you have these types of skateboard and want to avoid being hurt by their sharp edges then consider risers- which provide extra height so that your feet don’t hit them when riding down hills!
What are some good brands of risers?
Some good brands of risers include Independent, Black Label, and Diamond.
Do risers help you ollie higher?
Risers can help you ollie higher because they provide extra height. The pads increase the distance you are from the ground, which lets your tail go down further and angles out a bit so that when sliding forward on an ollie it’s easier to get more height.
Do risers make your skateboard go faster?
No, risers will not make your skateboard go faster. In fact, they may actually slow you down because they add weight and friction to your board.
How do you put risers on a skateboard?
Installing risers on your skateboard is easy! Just follow these steps:
1. Place the riser pads on the trucks where you want them.
2. Screw in the bolts that come with the pads.
3. Tighten the bolts until the pads are secure.
4. That’s it! You’re ready to skate.
Do risers come in different colors?
Yes, risers come in a variety of colors so you can choose the ones that match your skateboard or stand out from the crowd.
Do I need risers for 55mm wheels?
If you have 55mm wheels, you will need 1/8″ risers. Risers are usually recommended if you have larger wheels – 55mm or more–with your deck resting on them at all times to reduce wheel stress caused by compression against an edge.
Can I use old school risers on my new school deck?
Yes, you can use old school risers on your new school deck. However, keep in mind that the bolts may not line up perfectly and you may need to drill new holes.
Can I use 1/8 risers with 60mm wheels?
No, you cannot use 1/8 risers with 60mm wheels because they will not provide enough height. You will need at least 1/4″ risers for 60mm wheels.
Conclusion:
Risers are a great way to protect your skateboard wheels and improve your riding experience. Be sure to choose the right size risers for your wheels and deck, and follow the instructions carefully to install them properly. With risers, you’ll be able to enjoy your skateboarding adventures to the fullest!
Thanks for reading! I hope this was helpful.
Please feel free to leave a comment if you have any questions.
Read more: How to Shift Gears on Your Electric Bikes
